Sign In | Join Free | My bjjsgy.com
China RISHBIN CO., LTD logo
RISHBIN CO., LTD
RISHBIN CO., LTD
Active Member

6 Years

Home > Steel Sheet Slitting Machine >

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized

RISHBIN CO., LTD

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized

Brand Name : RISHBIN

Model Number : RS 3.0-12.0

Certification : CE

Place of Origin : Wuxi, China

MOQ : 1 PCS

Price : Negotiable

Payment Terms : L/C, T/T, Western Union

Packaging Details : Cartoon

Product Name : Steel Sheet Slitting Machine

Strip Width : ≥100mm

Slitting Accuracy : ±1.0mm

Coil I.D : φ508,φ610,φ760mm

Color : Requirement

Type : Coil Slitting line

Contact Now

0-60m/Min Steel Sheet Slitting Machine 3.0-12.0mm High Speed Ф320 Blade Shaft
Steel Sheet Slitting Machine​ Introduction
  • Minimum Burr on strip.
  • Automatic Coil Loading
  • 2 complete slitting heads for quick offline tooling changeovers.
  • Straight edged recoiling.
  • Economic efficency due to high automation level.
  • Ease of Operation and Maintenance
  • Slitting Lines are available in different sizes and models as per the demands and specifications laid by the clients.
  • It is available in different capacities and standards according to the demand of the clients.
  • These Slitting Lines are widely appreciated amongst our clients for their user friendly designs and high resistance to temperature variations.

Knives:

These knives partially penetrate the coil stock causing a crack or fracture on both sides of the stock, separating the mults from one another. Rubber stripper rings are also employed depending on the material thickness to attain a good edge so no burr is present that will hinder downstream operations. As the material is slit, the far outside edges of the coil have edge trim.
Edge trim:
This edge trim is taken up on a scrap winder. If the material to be slit is extremely thin, a looping pit can be used to take up the varying thickness of the mults as the edge cuts are generally thinner than the center cuts. The thin the material, the longer the lineal footage in the master coil.
The looping pit will take up the additional volume prior to entering the tension stand. The tension stand is located prior to the recoiler. A tensioning device is needed because the master coil is crowned or larger in diameter in the center of its width than at the edges.

Without a tension stand, the slit material from the center of the master coil would take up more quickly while the outboard strips would hang loosely. The recoiler is an expanding mandrel type. The recoiler takes up the slit mults. The recoiler mandrel is fitted with an overarm device which is a shaft with separator discs which prevent interleaving of the narrower coil widths.

The position of the discs are directly in-line with the slitting knives. The finished slit mults are banded on the outside diameter and are pushed off of the recoiler mandrel onto an awaiting coil car or turnstyle.
Steel Sheet Slitting Machine Specification:
Model No. RS 3.0-12.0 RS 4.0-16.0 RS 6.0-20.0
Coil Material CR Coils , HR Coils, S.S Steel Coils, GI Coils, AL Coils, Copper Coils Picking Oil Coils
Coil Thickness 3.0~12.0mm 4.0~16.0mm 6.0~20.0mm
Line Speed 0~60m/min 0~50m/min 0-50m/min
Coil Weight ≤30T(35T) ≤30T(35T) ≤30T(35T)
Coil I.D φ508,φ610,φ760mm φ508,φ610,φ760mm φ508,φ610,φ760mm
Coil O.D ≤φ2200mm ≤φ2500mm ≤φ2500mm
Strip Width ≥100mm ≥100mm ≥100mm
Number of Strip 5~20 ≤5 ≤5
Slitting Accuracy ±1.0mm ±1.0mm ±1.0mm
Blade shaft Ф320 Ф340mm Ф360mm
Electrical Control System PLC Automatic control PLC Automatic control PLC Automatic control
COIL/ROLL DETAILS Material HR, CR, SS, GI, PPGI,
Tensile Strength δb≤550Mpa,δS≤260Mpa
Coil/Roll thickness 6-20mm
Steel Coil/Roll width 600-2500(Max)
Coil/Roll I.D Φ500-760 mm
Coil/Roll O.D Φ2500mm(Max)
Steel Coil/Roll Weight 35T(Max)

Slitter parameters

knife pivot diameter Ф360 mm
Knife pivot material 40Cr
Blades specification Φ360mmXφ360mmX20mm
Blade material 6CrW2Si
Max slit quantity 4 pcs (16mm) 8 pcs(8mm)(Customized)
Width precision ≤±0.05mm/2M

Other parameters

Power 380V/50Hz/3Ph(Customized)
Line speed 0-60m/min
Capacity 450 KW
Whole line Dimension 45m(L)X10m(W)
Line direction From right to left(Face to machine)
Machine color Blue

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized


Product Tags:

pneumatic sheet metal cutter

      

steel slitting equipment

      
China Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized wholesale

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: RISHBIN CO., LTD
*Subject:
*Message:
Characters Remaining: (0/3000)
 

Friendly Links: www.everychina.com

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2024 bjjsgy.com. All rights reserved.